Hunan Yonghui Electromechanical Equipment Co., Ltd.

YH-6536B petroleum product distillation tester (low temperature double tube type)

YH-6536B petroleum product distillation tester (low temperature double tube type)

Short Description:

This instrument is designed and manufactured according to the requirements of GB/T 6536 "Petroleum Product Distillation Determination" of the People's Republic of China, and is suitable for the distillation determination of gasoline, aviation gasoline, jet fuel, special boiling point solvents, naphtha, diesel oil, fractionated fuel and similar petroleum products according to the standard of GB/T 6536.

This instrument is a petroleum product distillation tester with the lowest temperature of condenser tube up to 0℃ and dual tube working mode. It is an ideal petroleum product distillation test instrument under low temperature conditions.

Product Detail

Product Tags

Main technical features

1. This instrument is a low temperature, double pipe working mode, the lowest set temperature is 0℃, can be used for single tube independent test, but also can carry out two samples at the same time, greatly improving work efficiency.
2. The constant temperature bath is composed of digital temperature controller, stainless steel heater, new refrigeration compressor and electric stirrer, with uniform temperature in the bath, which can fully meet the requirements of the test.
3. The special structure design can cool down quickly, and the bath temperature can be reduced from room temperature to 0℃ in about 50 minutes.
3. Use a special heating furnace to ensure the safety of the test; the heating power is continuously adjustable to meet the requirements of the test.

Main technical parameters and indicators

1. Working power supply: AC (220±10%) V, 50Hz.
2. Electric furnace heating power: 1300W × 2.
3. Volume of the cylinder: 100ml, with a scale of 1ml.
4. Distillation flask: 125mL, in line with the requirements of GB/T 6536.
5. Thermometer: The scale range is respectively (-2~+300)℃ and (-2~+400)℃, with a division of 1℃.
6. Electric furnace moving plate: made of silicon carbide plate, with aperture of φ32㎜, φ38㎜ and φ50㎜ respectively.
7. Temperature controller: ① Temperature control range: (0~60) ℃ Any setting.
       ② Temperature control accuracy: ±0.5℃.
       ③ Temperature display: LED digital display.
Note: Temperature control refers to the temperature control of the condensate bath in the condenser tube.
8. Ambient temperature: ≤+30℃.
9. Relative humidity: ≤85%.
10. Refrigeration system: new refrigeration compressor.
11. Power consumption: not more than 4600W.
12. Shape and size: 730㎜ × 530㎜ × 580㎜ (length, width and height).
  • Previous:
  • Next:

    • RELATED PRODUCTS

    Leave Your Message

    home

    products

    WhatsApp

    About Us